Browse Categories
Browse by Manufacturer

Multi-Choice Super Opaque Colors

Multi-Choice Opaque is a plastisol ink designed specifically for high opacity and bleed-resistant applications. Ideal for printing 50/50 blends and other difficult fabrics. In fact, if you want just one ink to do everything, Multi-Choice Opaque is the choice. For example, with the addition of MSB-100 Clear/Soft-Hand Extender, Multi-Choice Opaque can achieve a “soft-hand” feel without affecting the cure time! You also can add our Puff Concentrate and have a true “puff ink” with the added advantage of being able to control the amount of puff desired. We even have an Athletic Additive that increases adhesion without a two-part catalyst) and abrasion-resistance. For nylon jacket printing, the addition of a jacket catalyst will turn Multi-Choice Opaque into a two-part ink that really sticks.


Displaying products 1 - 8 of 8 results
MCO-400 Brt. Orange
Your Price: From $25.00 to $360.00
MCO-400 Brt. Orange
Pantone 172C
MCO-505 Cherry Red
Your Price: From $25.00 to $290.00
MCO-505 Cherry Red
Pantone 1795C
MCO-5140 Rojo Red
Your Price: From $25.00 to $325.00
MCO-5140 Rojo Red
Pantone 187C
MCO-703 Light Blue
Your Price: From $17.00 to $243.00
MCO-703 Light Blue
Pantone 306U
MCO-802 Brt. Green
Your Price: From $25.00 to $325.00
MCO-802 Brt. Green
Pantone 355C
MCO-900 Gold
Your Price: From $25.00 to $325.00
MCO-900 Gold
Pantone 1235C
MCO-902 Lt. Gold
Your Price: From $29.95 to $375.00
MCO-902 Lt. Gold
Pantone 116U
MCO-903 Lemon Yellow
Your Price: From $25.00 to $325.00
MCO-903 Lemon Yellow
Pantone 107C



Features and Tips

Finish: Semi-gloss.
Opacity: Excellent.
Mileage: Excellent. Approximately 450 to 1650 sq. ft. per gallon, depending on ink deposit and screen mesh.
Drying: 300° F - 330° F for 2-3 minutes for direct printing; 220° F - 240° F for 30-60 seconds for transfers.
Fabrics: All types. For maximum coverage on dark garments, use 61 to 110 monofilament.
Stencils: All types of direct and capillary film systems. For hand-cut stencils, use water-soluble films.
Wash-up: Use Thinner DT or any conventional plastisol wash-up system.
Reducers/Thickeners: Reducer/Thinner DT will reduce tackiness and viscosity. It also will reduce “ink hang” in the screen while maintaining opacity. Use 1% - 3% by weight. Reducer/Thinner PL will increase gloss and film elongation. It also will improve “ink flow.” However, it cuts opacity and slightly increases the dry/cure time. Use 1% - 5% by weight. Use with caution. Thickener Paste will stir in easily and will slightly increase the viscosity of the ink. It also will slightly increase dry/cure time. Use 1% - 5% by weight. Thickener Powder also will increase the viscosity but will not affect the dry/cure time. However, it must be stirred in with a drill mixer. Use up to 1% by weight.
Storage: Store in a relatively cool area. Keep away from extreme heat and direct sun penetration. Store below 95°F.

Stir plastisols prior to each use. Do not dry clean or use bleach.
Always pretest before use to establish suitability and procedures prior to production.

Search
Shopping Cart
Your cart is empty.