| | |
|
| |
| | |
|
|
Multi-Choice Standard Colors
Multi-Choice is a plastisol ink for general-purpose
screen printing on a variety of textile products. It can be printed on cotton,
cotton/polyester blends, rayons and most open-weave and mesh nylon material.
multi-Choice also can be used for printing standard or hot split transfers,
in addition to athletic printing. multi-Choice is also fast-flashing. A variety
of additives are available for use with multi-Choice for special applications.
In fact, if you want just one ink to do everything, multi-Choice is the choice.
for example, with the addition of MSB-100 Clear/Soft-Hand Extender, Multi-Choice
can achieve a "soft-hand" feel without affecting the cure time! You
also can add our Puff Concentrate and have a true "puff ink"with the
added advantage of being able to control the amount of puff desired. We even
have an Athletic additive that increases adhesion (without a two-part catalyst)
and abrasion-resistance. For nylon jacket printing, the addition of a jacket
catalyst will turn Multi-Choice into a two part ink that really sticks
 Multi-Choice
PDF Product Sheet
 Use our on-line color card
to order Multi-Tech standard colors.
Click
here to view the Standard Color Chart
Every monitor is different
so
do not use these colors for exact matching.
Buy Multi-Tech Plastisol Ink Below: |
| |
MC-211
Gray
Pantone 7539C |
|
MC-700
Navy
Pantone 2767C |
| |
MC-300
Dark Brown
Pantone Black5C |
|
MC-719
Light Navy
Pantone 2768C |
| |
MC-302
Lt. Brown
Pantone 1685U |
|
MC-702
Lt. Ultra Blue
Pantone 2728C |
| |
MC-303
Flesh Tan
Pantone
134C |
|
MC-705
Turquoise
Pantone 632/320 |
| |
MC-304
Teddy Brown
Pantone
4635C |
|
MC-704
Royal Blue
Pantone 294C |
| |
MC-500
Scarlet
Pantone 1795C |
|
MC-706
Solar Blue
Pantone 3005U |
| |
MC-502
Brt. Red
Pantone 1788C |
|
MC-720
Columbia Blue
Pantone 646C |
| |
MC-503
Petal Pink
Pantone 1765C |
|
MC-800
Kelly Green
Pantone 3415C |
| |
MC-504 Neon Pink
|
|
MC-803 Lime Green
|
| |
MC-651
Cardinal
Pantone 1955C |
|
MC-804
Paradise
Pantone 3252/3262C |
| |
MC-600
Purple
Pantone275/2597C |
|
MC-808
Forest
Pantone
343C |
| |
MC-602 Lt. Purple
Pantone C |
|
MC-904 Pale Yellow |
| |
MC-200
Black  |
|
MC-650
Maroon
Pantone 5115C |
| |
MC-202 Intense Black
|
|
MC-665 Light Maroon
|
Features
and Tips
Finish: Semi-Gloss
Opacity: Excellent
Mileage: Excellent. Approximately
450 to 1650 sq. Ft. per gallon, depending on ink deposit and screen mesh.
Drying: 300°F - 330°F for
2-3 minutes for direct printing; 220°F - 240°F for 30-60 seconds for transfers.
Fabrics: Alltypes. For maximum
coverage on dark garments, use 61 to 110 monofilament.
Stencils: All types of direct systems. For hand-cut stencils, use water-soluble
films.
Wash-ups: Use Thinner DT
or any conventional plastisol wash-up sytems.
Reducers/Thickners
Reducer/Thinner DT: Will
reduce tackiness and viscosity. It also will reduce "ink hang"
in the screen while maintaining opacity. use 1%-3% by weight.
Reducer/Thinner PL: Will
increase gloss and film elongation. It also will improve "ink flow."
However, it cuts opacity and slightly increases the dry/cure time. Use
1%-5% by weight. Use with Caution.
Thickener Paste: Will stir
in easily and will slightly increase the viscosity of the ink. It also
will slightly increase dry/cure time. Use 1%-5% by weight.
Thickener Powder: also will
increase the viscosity but will not affect the dry/cure time. However,
it must be stirred in with a drill mixer. Use ip to 1% by weight.
Storage: Store in a relatively
cool area. Keep away from extreme heat and direct sun penetration. Store
below 95F.
Stir plastisols prior to each use. do not dry clean or use bleach.
Always pretest before use to establish suitability and procedures
prior to production.
|
|
|
|
|