| | |
|
| |
| | |
|
|
Multi-Match Color Matching Ink System
Multi-Match is a vinyl plastisol ink designed to simulate the Pantone*
Matching System colors. The colors may be mixed together to make all the
colors found in the Pantone Formula Guide. Multi-Match is created especially for
a "soft-hand" feel and for wet-on-wet printing. It contains no water,
may be used with any stencil system and may be printed on a variety of textile
products. Simple to use, no special training required.
*Pantone, Inc's check-standard trademark for color reproduction and color
reproduction materials. Multi-Tech is a Pantone Licensee.
 Technical
Guide for Multi-Match System
We have listed the closest PANTONE® color to our standard color.
Every monitor is different so do not use these colors for exact matching.
| Buy Multi-Match
Opaque Ink Below: |
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
MMO-119
Process Blue |
|
|
| |
|
|
MMO-122
Black |
|
|
| |
|
|
MMO-125
Red 032 |
|
|
Buy Multi-Match Ink Below: |
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
MMC-119
Process Blue |
|
|
| |
|
|
MMC-122
Black |
|
|
| |
|
|
MMC-125
Red 032 |
|
|
Features and Tips
Finish: Gloss/semi-gloss, depending upon application.
Opacity: Semi-opaque.
Mileage: Excellent. Approximately 700-1,750 sq. ft. per
gallon.
Drying: 300° F - 330° F for 2-3 minutes.
Fabrics: All types. Mesh selection can affect color intensity
and appearance.
Stencils: All types of direct or indirect systems. Water-resistant
emulsions are not necessary.
Wash-up: Use Thinner DT or any conventional plastisol
wash-up system.
Reducers/Thickeners: Reducer/Thinner DT will reduce tackiness
and viscosity. It also will reduce “ink hang” in the screen
while maintaining opacity. Use 1% - 3% by weight. Reducer/Thinner PL will
increase gloss and film elongation. It also will improve “ink flow.”
However, it cuts opacity and slightly increases the dry/cure time. Use
1% - 5% by weight. Use with caution. Thickener Paste will stir in easily
and will slightly increase the viscosity of the ink. It also will slightly
increase dry/cure time. Use 1% - 5% by weight. Thickener Powder also will
increase the viscosity but will not affect the dry/cure time. However,
it must be stirred in with a drill mixer. Use up to 1% by weight.
Storage: Store in a relatively
cool area. Keep away from extreme heat and direct sun penetration. Store
below 95° F.
Stir plastisols prior to each use. Do not dry clean or use bleach.
Always pretest before use to establish suitability and procedures
prior to production. |
|
|
|
|