| | |
|
| |
| | |
|
|
Nylon Mesh & Athletic Ink Colors
Multi-Tech's nylon mesh ink is specially formulated for printing on nylon mesh
fabrics (not nylon jackets). It provides superior abrasion resistance, maximum
adhesion, wash durability and is easy to print. It features a fast flashing formulation
with little or no "after-tack".
Buy
Multi-Tech Nylon Mesh & Athletic Ink Below:
Features and Tips
Finish: Semi-flat-raised.
Screens: 38 to 86 mesh for large-area
prints, 110 to 125 for finer detail. Screens may be prepared with conventional
emulsions or indirect capillary films. High-density printing requires special
screens and stencil preparation.
Fabrics: Cottons, cotton blends,
polyesters, and other synthetics.
Drying: 300° F - 330° F
to achieve full fusion. Overheating will cause puff ink to collapse. Expansion
begins at 270° F. Test to determine ideal drying time and temperature settings.
Stencils: All types of direct or
capillary film systems.
Wash-up: Any conventional plastisol
wash-up system.
Reducers: The ink should be used
straight from container. If modification is needed, use 1% - 3% Thinner DT by
weight, or 3% - 5% Thickener Paste. Remember that over-modification can affect
performance of the ink.
Storage: Store in a relatively cool
area. Keep away from extreme heat and direct sun penetration. Store below 95°
F.
Stir plastisols prior to each use. Do not dry clean or use bleach.
Always pretest before use to establish suitability and procedures prior
to production.
|
Your Price: From $10.00 to $18.00
Nylon jacket threads are woven very tightly to resist wind and water, but that also makes it hard for plastisol ink to stick ...
| | |
|
|
|