Designed for "hot peel" (hot split) plastisol transfers for an even 60/40 split of the ink film when you peel, and it resists migration of the plasticizers into the paper for better shelf life.

Transfer for 60/40 split.
400-340-2-BX 12.5" x 12.5" 1000 sheets ........... $54.10

400-340-4-BX 25" x 38" 1000 sheets ............... $350.00 Available
Please call to order this size. 1-800-325-8317

Applications:
Hot split transfers (to give a soft touch).

Printing Method:
Straight screen printing of one or several colors with appropriate plastisol inks.

Main Advantages:

No curling

Very good dimensional stability

Smooth easy release

High ratio of ink transfer

Recommendations:

Order the paper in the right grain direction

Keep the paper wrapped before printing

If the paper is to be cut before printing, grain direction must be taken into consideration

For screen printing it is recommended:
**To run the paper through the dryer before the multicolor screen printing, in order to bring a pre-shrink
**To protect paper from humidity after each color

Between each step of production, paper must be protected against outside humidity.

It is recommended to make transfer tests on the type of textile of the final user before industrial production.

Wrap the finished product (ink + plastisol complex) in a plastic film to avoid outside humidity and store it at temperature around 20°C (68° F°).

Transfer to be made within 6 month after printing.  Shelf life can be affected by inks used and other variables.

Optimal transfer temperature: 180 –185 ° C (356-365 ° F).  For higher temperatures, trials should be done before hand.

Caution: The information and recommendations contained in this product information sheet are based on our present knowledge, and believed to be accurate. However, no garantee regarding their accuracy is given as we cannot cover or anticipate every possible application of our products. Users shall make their own tests to satisfy that they will meet fully their particular requirements.