Ulano No. 2 Microgrit

Ulano

Ulano No. 2 Microgrit
A powder for mechanical treatment/abrasion of polyester mesh.

Your Price: From $27.88 to $92.94

Product Options

Choose Size::

Quantity:

Detailed Description

An inert, abrasive powder that mechanically roughens or abrades nylon and polyester.

Roughening increases the surface area of synthetic fabrics for a better mechanical bond with indirect films and direct emulsions; for better fabric water retention for the adhering of CDF® direct-films; and for extended stencil life with any stencil system. The particles in Microgrit No. 2 are fine enough (18-20 microns) to pass through even the smallest mesh openings. Do not use Microgrit No. 2 on natural silk.

Instructions

Dampen the screen with water.

Sprinkle Microgrit No. 2 liberally on the printing side of the screen.

Rub the Microgrit No. 2 back and forth vigorously with a wet, stiff, short-bristle nylon brush over the entire printing side. Or, rub a damp, natural fiber rag back and forth across the printing side of the fabric until the rag begins to fray.

Thoroughly rinse the screen with water from both sides, including the frame and frame corners.

Degrease the screen with Screen Degreaser Liquid No. 3 before attempting to make a stencil. For the convenience of roughening and degreasing in a single step, and especially for larger screens, use Ulanogel 23.

Product Options

Detailed Description

Related Products

Neoprene Rubber Gloves

Chemical Goggle with Splash Frame

Flat Brush 3.5" x 6"